These knit overalls are one of our best-selling patterns, and they make a great project if you're new to sewing. Below, we walk through every step of sewing the Lowland Kids Overalls pattern. Each step has a short clip from our sew-along video, so you can watch only the part you're on, then follow the written steps.
In this tutorial video, we sew the knotted-front shorties in size 12–18M, using a lightweight cotton jersey with a plain white jersey facing. Most steps are the same for the other lengths and for the crossed-back version.
Project at a glance
| Skill level | Beginner |
|---|---|
| Sewing time | About 1 hour, once your pieces are cut |
| Sizes | NB to 9/10 (knotted front), NB to 5T (crossed back) |
| Lengths | Shorties, shorts, or pants |
| Fabric | Knits, like jersey, slub jersey, or French terry |
| Fabric amount | ½ to 1½ yards, depending on size |
| Machine | A serger, or a regular sewing machine with a zigzag stitch |
| Pattern | Overalls PDF pattern, $9, with Letter, A0, and projector files |
How to sew kids' overalls
Tap a step to jump to its video clip and full instructions.
- Print and tape the pattern.
- Cut the body piece at the line for your length.
- Cut out your fabric.
- Sew the side seams, crotch seam, leg bands, and straps.
- Finish the facing edge and turn the straps right side out.
- Sew the leg bands to the leg openings.
- Pin the straps between the back and the back facing.
- Add interfacing, then sew the facing to the overalls.
- Turn the overalls right side out and press.
- Understitch the facing.
- Tack the facing at the side seams.
- Sew two buttonholes on the front.
- Thread the straps through and tie them.
Watch the full sew-along
The full Lowland Kids Overalls sew-along (15 minutes). Each step below also has its own short clip.
What you'll need
- The Overalls PDF pattern
- Knit fabric (see the amounts below). You can cut the facing from the same fabric or a contrast, like the plain white jersey we used.
- A small piece of fusible interfacing
- Thread
- A serger, or a sewing machine with a zigzag stitch
- A sewing machine with a buttonhole setting (for the knotted front)
- Pins or sewing clips
- Fabric scissors or a rotary cutter
- An iron
- Paper scissors and tape, for putting the pattern together
- Chalk or a washable fabric marker
- A seam ripper, for opening the buttonholes
- For the crossed-back version only: two buttons and 1" or 1¼" wide elastic
Choose your style and length
Video clip: 0:10 to 2:27 (2 min 17 sec) · Open on YouTube at 0:10
The pattern comes in two styles:
- Knotted front (sizes NB to 9/10). The straps go over the shoulders and tie through two buttonholes on the front. The knots make the straps easy to adjust. You can use buttons instead if you like.
- Crossed back (sizes NB to 5T). The straps cross in the back and button onto an elastic back waistband.
Both styles come in three lengths, all cut from the same body piece: shorties (a high-cut short), shorts, and full-length pants.
Can't decide? Look through photos of each style to see which you like! Browse the Overalls lookbook and the shorts and shorties lookbook to see them on real kids.
Pick your size
Measure your child and compare with the chart below. The pattern instructions explain how to adjust the length and what to do if your child is between sizes.
For a roomier fit, size up. In the video, we sew size 12–18M for a little one who's about to turn 1, so the overalls fit a bit loose.
| Size | Height | Chest | Waist | Hips |
|---|---|---|---|---|
| NB | 19–21 | 14 | 14 | 15 |
| 0–3M | 21–24 | 15.5 | 15 | 15.5 |
| 3–6M | 24–26 | 17 | 15.5 | 16 |
| 6–9M | 26–27 | 17.5 | 16.25 | 16.5 |
| 9–12M | 27–29 | 18 | 16.75 | 17 |
| 12–18M | 29–31 | 18.5 | 17 | 18 |
| 18–24M | 31–33 | 19.5 | 18.5 | 18.5 |
| 2T | 33–36 | 20 | 19.5 | 19.5 |
| 3T | 36–39 | 21.5 | 20 | 21.5 |
| 4T | 39–44 | 23 | 21 | 22.5 |
| 5T | 44–48 | 23.5 | 21.5 | 23 |
| 6/7 | 47–50 | 24 | 22 | 24 |
| 7/8 | 49–54 | 25 | 22.5 | 25 |
| 8/9 | 54–56 | 26 | 23.5 | 26 |
| 9/10 | 56–58 | 26.5 | 24 | 27 |
Best fabric for kids' overalls
Use a knit fabric. We love slub jersey and French terry for these.
- For warm weather: a lightweight jersey. We picked a breathable cotton jersey for summer.
- For cooler weather: a heavier slub jersey or French terry. You could even try fleece.
- For the facing: the same fabric, or a plain lightweight jersey.
| Sizes | Fabric |
|---|---|
| NB to 9M | ½ yard |
| 12M to 24M | ¾ yard |
| 2T to 3T | 1 yard |
| 4T to 9/10 | 1½ yards |
Step by step: how to sew the overalls
Each clip starts and stops at the right spot in the video. Press play, watch the step, then follow along.
Print and tape the pattern
Video clip: 2:27 to 3:54 (1 min 27 sec) · Open on YouTube at 2:27
After you buy the pattern, you'll get an email with a link to download the instructions and pattern files. If you've never printed a PDF pattern, the instructions walk you through it.
- Print the pattern on Letter or A4 paper at home. You can also have the A0 file printed at a print shop, or use the projector file. New to projectors? Read our beginner's guide to sewing with a projector.
- Lay all the pages out in order. They're clearly numbered.
- Trim only the edges that need to be taped together. You don't have to trim every page.
- Line up the markings and tape the pages together.
- Cut out each pattern piece.
Tip: Seam allowance is already included in the pattern pieces, so you don't need to add any.
Choose your length and trim the pattern
Video clip: 3:54 to 4:54 (1 min) · Open on YouTube at 3:54
- Check the instructions to see which pattern pieces you need for your style.
- Find the cutting line for your length on the body piece. Cut on the upper curved line for shorties, the upper straight line for shorts, or the bottom straight line for pants.
- Trim the pattern piece along that line.
Tip: Keep the leg piece you cut off. In the video we planned on pants, didn't have enough fabric, and switched to shorties. With the extra piece saved, you can tape it back on and make pants next time.
Cut your fabric
Video clip: 4:54 to 5:37 (43 sec) · Open on YouTube at 4:54
Each pattern piece tells you how many to cut. For the knotted-front shorties, we cut:
- 2 body pieces on the fold (a front and a back)
- A front and back facing, from plain white jersey
- 4 strap pieces (two pairs)
- 2 leg bands
Tip: Pins can leave small holes in knit fabric. Sewing clips don't. If you do use pins, use just a few.
Sew the first seams in one batch
Video clip: 5:37 to 6:48 (1 min 11 sec) · Open on YouTube at 5:37
Knits stretch, so you need a stitch that stretches too. We used a serger (also called an overlocker). On a regular sewing machine, use a zigzag stitch. Test it on a scrap of your fabric first and make sure the seam looks neat.
With right sides together, sew:
- Both side seams of the facing.
- Both side seams of the overalls.
- The crotch seam of the overalls.
- Each leg band into a loop. Fold the band in half with the short ends together, and sew the short edge.
- Each pair of straps. Sew both long edges and one short end. Leave the other short end open so you can turn the strap.
Tip: Sew all of these in one sitting to save trips back and forth to the machine. Then clip the pieces apart and trim the thread tails.
Finish the facing and turn the straps
Video clip: 6:48 to 7:09 (21 sec) · Open on YouTube at 6:48
- Turn the facing right side out.
- Serge around its bottom raw edge. This is optional, but it keeps the edge from curling so the facing lies flat. The bottom edge stays loose inside the overalls. It isn't hemmed or sewn down.
- Turn the straps right side out. A chopstick or turning tool helps push out the corners.
Attach the leg bands
Video clip: 7:09 to 8:30 (1 min 21 sec) · Open on YouTube at 7:09
The leg bands work like little cuffs around the leg openings.
- Fold each band in half with wrong sides together, so the raw edges meet.
- Optional: put a pin at the halfway point of the band. It helps you spread the band evenly around the leg.
- Keep the overalls inside out. Open up one leg opening and place the band inside it. The right side of the band should face the right side of the overalls, with the raw edges lined up.
- Line up the band's seam with the crotch seam, so it sits on the inner leg where it's hidden.
- Pin, then serge all the way around. You're sewing through three layers: both layers of the band, plus the overalls.
- Repeat on the other leg.
When you flip the band down, it should look neat and even all the way around.
Put the facing and straps in place
Video clip: 8:30 to 9:31 (1 min 1 sec) · Open on YouTube at 8:30
- Keep the overalls inside out. Fold the front down so you can reach the back.
- Tuck the facing (right side out) inside the overalls. The right side of the facing should face the right side of the overalls.
- Fold the back facing down to uncover the top edge of the back.
- Lay the straps on the back, with their open ends flush with the top edge. Leave about ¼" between each strap and the side edge.
- Tuck the straps down inside, lay the back facing over them, and pin everything in place.
Tip: That ¼" gap keeps the straps out of the seam allowance at the armholes, so they flip up cleanly later. It's spacing for the straps, not a seam allowance.
Add interfacing and sew the facing on
Video clip: 9:31 to 10:17 (46 sec) · Open on YouTube at 9:31
- Fuse interfacing to the wrong side of the overalls front, along the top edge. This reinforces the spot where the buttonholes will go.
- Serge straight across the top of the front.
- Serge around the rest of the top: around one armhole, across the top of the back (over the straps), and around the other armhole.
Tip: We used two small squares of interfacing. In hindsight, we would use one strip across the whole top edge instead.
Turn and press
Video clip: 10:17 to 10:43 (26 sec) · Open on YouTube at 10:17
- Turn the overalls right side out and tuck the facing inside so it lies flat.
- Use your fingers to push out the edges and corners, especially across the front and around the armhole curves.
- Press everything flat with an iron.
Understitch the facing
Video clip: 10:43 to 11:52 (1 min 9 sec) · Open on YouTube at 10:43
Jersey can shift in the wash, and the facing may start to peek out. Understitching keeps it rolled to the inside.
- Reach between the facing and the overalls, and push the seam allowance toward the facing.
- Stitch on the facing, close to the seam, catching the seam allowance underneath. Don't sew through the main fabric.
- Start a little way down the armhole. It's hard to reach right into the corner, and no one will see it from the outside.
Tip: Use a regular straight stitch here. This seam doesn't need to stretch.
Tack the facing at the side seams
Video clip: 11:52 to 12:14 (22 sec) · Open on YouTube at 11:52
- Line up the side seam of the facing with the side seam of the overalls.
- Stitch in the ditch: sew right on top of the existing side seam, so the new stitches sink into it and disappear.
This holds the facing in place, so it doesn't flip out while your child is wearing the overalls or when they go through the wash.
Sew the buttonholes
Video clip: 12:14 to 13:15 (1 min 1 sec) · Open on YouTube at 12:14
- Mark both buttonholes on the front with chalk or a washable marker. Measure so they match on both sides, and keep them away from the edges.
- Sew the buttonholes. Every machine does this a little differently, so check your machine's manual. Our buttonholes are about ¾" long.
- Lay a strap over each buttonhole to make sure it will fit through.
- Before you cut them open, put a pin across each end of the buttonhole. The pins stop your seam ripper from cutting too far.
- Cut each buttonhole open with a seam ripper.
Tie the straps (or add buttons)
Video clip: 13:15 to 13:40 (25 sec) · Open on YouTube at 13:15
- Thread each strap through a buttonhole.
- Tie a knot. Knots make the straps adjustable, so it's easiest to do this with the overalls on your child.
Prefer buttons? Sew them onto the straps instead. Put the overalls on your child first and mark where the buttons should go, so they fit just right.
How they fit, and what to wear underneath
Video clip: 13:40 to 14:16 (36 sec) · Open on YouTube at 13:40
We sized up for a roomier fit, so this pair runs a little long. That leaves room to grow. The knotted straps help too: tie them shorter now and let them out as your child grows.
Overalls are usually worn over a top. If you want them to work on their own, you can raise the armhole a little so it doesn't scoop as low.
These Lowland Kids patterns layer well underneath. For cooler days, the Nap Tee has a long-sleeve option, and the Kids Chunky Cardigan goes over the top.
More overalls made with this pattern






Common questions about sewing kids' overalls
How long does it take to sew kids' overalls?
Plan on about an hour of sewing once your pieces are cut. Printing, taping, and cutting the pattern take extra time, especially the first time you make it.
Is this a good overalls pattern for beginners?
Yes. It's rated beginner, and most of the sewing is straight seams. The two steps that take the most care, attaching the leg bands and sewing the buttonholes, are shown up close in the clips above.
What's the best fabric for kids' overalls?
A knit. We love slub jersey and French terry. Choose a lightweight jersey for hot weather and a heavier French terry for cooler months.
How much fabric do I need?
½ yard for NB to 9M, ¾ yard for 12M to 24M, 1 yard for 2T to 3T, and 1½ yards for 4T to 9/10.
Can I sew these overalls without a serger?
Yes. Use a zigzag stitch on a regular sewing machine for the seams, and test it on a scrap first. You'll also need your machine's buttonhole setting for the knotted front.
What sizes does the pattern include?
The knotted front comes in sizes NB to 9/10. The crossed back comes in sizes NB to 5T. See the size chart above for measurements.
What's the difference between the knotted front and the crossed back?
On the knotted front, the straps go over the shoulders and tie through two buttonholes on the front. It comes in sizes NB to 9/10. On the crossed back, the straps cross in the back and button onto an elastic back waistband. It comes in sizes NB to 5T and needs two buttons and 1" or 1¼" wide elastic.
Can I use buttons instead of tying knots?
Yes. Sew buttons onto the straps instead of tying them. Try the overalls on your child first and mark where the buttons should go. You can also make the crossed-back version, which buttons at the back.
How do I keep the facing from showing on the outside?
Understitch it (step 10) and tack it at the side seams (step 11). Both are quick, and they keep the facing tucked inside, even after washing.
Can I make shorts and pants from the same pattern?
Yes. The body piece has three cutting lines: shorties, shorts, and pants. If you trim your printed pattern for a shorter length, keep the extra piece so you can tape it back on later.
Is seam allowance included in the pattern?
Yes. Seam allowance is already included in the pattern pieces, so you don't need to add any. The ¼" mentioned in step 7 is spacing for the straps, not a seam allowance.
What comes with the PDF pattern?
A layered PDF pattern in Letter and A0 sizes, so you can print just your size. The A0 file includes a page set up for projectors. You also get fabric and notion requirements and picture instructions. You can download everything right after you buy it.
Get the Overalls pattern
The PDF pattern is $9 and downloads right after checkout. It includes sizes NB to 9/10, both styles, all three lengths, and picture instructions.
Get the patternWatch on YouTube
Questions about the pattern? Email us at hello@lowlandkids.com.
When you finish a pair, tag us on Instagram @lowlandkids. We'd love to see it.
Want another overalls pattern? The Gigi Overalls are reversible and come with pocket options. Looking for your next easy project? See 5 Lowland Kids patterns for new sewists and 5 common mistakes new sewists make.
About us: Lowland Kids is a husband-and-wife shop that makes PDF sewing patterns for babies, kids, and adults, and sells knit fabric for home sewists.


















