A folded neckband is a strip of knit folded in half and sewn around a neckline, a lot like adding a cuff. We show you how to measure the neckline, work out how long to cut the band, and sew it on. Many Lowland Kids patterns have a neckband option, including the Basic Tee and the Sandlot Tee.
Each step has a short clip from our neckband video, so you can watch just the part you're on and then follow the written steps. In this tutorial video, we sew a charcoal knit neckband onto a raglan shirt with leaf-print sleeves, using a serger.
Project at a glance
| Patterns with a neckband option | Basic Tee, Sandlot Tee, Kids Casual Crew Set, Oversized Sweater, Set-In Sweater, Raglan Romper, and Sweater Romper |
|---|---|
| Fabric | Knit fabric for the shirt, and rib knit or the same knit for the band |
| Band length | Neckline measurement × 0.85, plus ½" |
| Machine | We use a serger in the video. On a sewing machine, use a small zigzag stitch. |
How to sew a folded neckband
Tap a step to jump to its video clip and full instructions.
- Measure around the neckline of your shirt.
- Multiply the neckline measurement by 0.85, add ½", and cut the neckband to that length.
- Sew the short ends of the neckband right sides together to make a loop.
- Turn the shirt inside out, fold the neckband in half with the right side out, and pin it to the neckline in quarters.
- Sew the neckband to the neckline, stretching the band as you sew.
- Turn the shirt right side out, and press and topstitch the seam allowance if you like.
Watch the full neckband tutorial
The full Lowland Kids folded neckband video (1 minute 46 seconds, music with on-screen captions). Each step below also has its own short clip.
What you'll need
- A knit shirt or sweater with the shoulder or raglan seams sewn, such as the Basic Tee or Sandlot Tee
- Knit fabric for the neckband. Rib knit is our favorite, or you can use the same knit as the shirt.
- Thread
- A serger or sewing machine
- A tape measure
- A rotary cutter, quilting ruler and cutting mat, or fabric scissors
- Pins
- An iron
Folded band or binding?
A folded band sits above the neckline with its seam on the inside, like a cuff. Binding wraps around the raw edge of the neckline instead. Binding is our own favorite neckline finish, but folded bands are really easy to attach, and we think it's worth trying both to see which you like best. If you'd like to try binding, see our binding tutorial.
A folded band works on a neckline, an armhole or a hood. The band measurements in our patterns are based on a fabric with medium stretch and recovery.
Step by step: how to sew a folded neckband
Each clip starts and stops at the right spot in the video. Press play, watch the step, then follow along.
Measure the neckline
Video clip: 0:03 to 0:15 (12 sec). Open on YouTube at 0:03
- Measure all the way around the neckline of your shirt with a tape measure. The neckline in our video measured 12".
Work out the band length and cut the band
Video clip: 0:15 to 0:27 (12 sec). Open on YouTube at 0:15
Our patterns give you the band measurements. If you're adding a band to something else, or your fabric stretches more or less than a medium-stretch knit, work out the length yourself.
- Multiply the neckline measurement by 0.85, then add ½" for seam allowance.
- For a really stretchy fabric, multiply by 0.8 instead. For a fabric with less recovery, multiply by 0.9.
- Cut the band to that length. For our 12" neckline, 12" × 0.85 + ½" = 10.7", so we cut the band 1½" wide and 10.7" long.
Tip: Full neckbands tend to come out a little small, even with this formula, so we add another ½" to their length.
Sew the short ends of the band together
Video clip: 0:27 to 0:37 (10 sec). Open on YouTube at 0:27
- Fold the band in half crosswise, right sides together, so the short ends line up.
- Sew the short ends together with a ¼" seam allowance to make a loop. We use a serger. On a sewing machine, use a small zigzag stitch.
Fold the band and pin it to the neckline
Video clip: 0:36 to 1:06 (30 sec). Open on YouTube at 0:36
- Turn the shirt inside out.
- Fold the band in half lengthwise, wrong sides together, so the right side shows on the outside. The seam should be fully inside the band.
- Press the fold.
- Pin the band in quarters.
- Slip the band into the neckline, with the raw edges of the band lined up with the raw edge of the neckline. Pin the four quarter points evenly around the neckline, so the band looks smooth when it's sewn.
Sew the band to the neckline
Video clip: 1:06 to 1:31 (25 sec). Open on YouTube at 1:06
- Sew the band to the neckline. We use a serger. On a sewing machine, use a small zigzag stitch.
- Stretch the band as you sew, so it fits the neckline evenly between the pins.
Turn the shirt right side out and topstitch if you like
Video clip: 1:31 to 1:42 (11 sec). Open on YouTube at 1:31
- Turn the shirt right side out.
- If you like the look, press the seam allowance down toward the shirt and topstitch ⅛" below the seam, so you sew through the seam allowance. Use a long straight stitch, or a chainstitch if you have a coverstitch machine.
Sew a band on a flat edge
You can also sew a band to a flat edge, before the garment is sewn into a circle. On a neckline, sew one shoulder seam, attach the band, then sew the other shoulder seam, much like we attach binding. On armholes, attach the bands before you sew the side seams.
- Fold the band in half lengthwise, wrong sides together, so you can see the right side. Press it.
- Pin the band to the right side of the edge, lining up the raw edges and stretching the band. How much you stretch depends on your fabric, so play with it a bit and see what you like for your fabric type.
- Sew the band on, stretching it as you go.
- If you like, press the seam allowance under the band and topstitch it.
Patterns to try a neckband on
Common questions about sewing a folded neckband
How long should a neckband be?
To work out a neckband length, measure around the neckline and multiply that number by 0.85, then add ½" for seam allowance. Use 0.8 for a really stretchy fabric and 0.9 for a fabric with less recovery. A 12" neckline gives a 10.7" neckband.
How wide should I cut a neckband?
The neckband in our video is cut 1½" wide. Our patterns give the band measurements for each size.
Why does my neckband come out too small?
Full neckbands tend to come out a little small, even with the formula. We add another ½" to the length of a full neckband to make up for it.
What fabric is best for a folded neckband?
Rib knit is our favorite for neckbands, and several of our patterns suggest it. You can also cut the neckband from the same knit as the shirt. The band measurements in our patterns assume a fabric with medium stretch and recovery.
How much should I stretch the neckband while I sew?
How much to stretch a neckband depends on your fabric, so play with it a little and see what you like for your fabric. Stretch the band evenly between the pins as you sew it to the neckline.
Do I have to topstitch a neckband?
No, topstitching a neckband is optional. If you like the look, press the seam allowance down toward the shirt and topstitch ⅛" below the seam with a long straight stitch.
Can I use a folded band on armholes or a hood?
Yes. A folded band works on a neckline, an armhole or a hood. On armholes, attach the band before you sew the side seams.
Can I sew a neckband before sewing both shoulder seams?
Yes. Sew one shoulder seam, sew the band on flat, then sew the second shoulder seam, much like we attach binding.
Is a folded neckband or binding better?
Binding is our own favorite neckline finish, but a folded neckband is really easy to attach. It's worth trying both to see which you like best.
Which Lowland Kids patterns have a neckband option?
The Basic Tee, Sandlot Tee, Kids Casual Crew Set, Oversized Sweater, Set-In Sweater, Raglan Romper and Sweater Romper all include a neckband option.
Patterns with a neckband option
The Basic Tee, Sandlot Tee, Oversized Sweater, and Kids Casual Crew Set all have a neckband option. Each PDF pattern downloads right after checkout.
Get the patternWatch on YouTube
Questions about the pattern? Email us at hello@lowlandkids.com.
When you finish a neckband, tag us on Instagram @lowlandkids. We'd love to see it.
More neckline tutorials: our knit binding tutorial and binding in the round tutorial. New to sewing knits? See 5 Lowland Kids patterns for new sewists.
About us: Lowland Kids is a husband-and-wife shop that makes PDF sewing patterns for babies, kids, and adults, and sells knit fabric for home sewists.









